logo    
chinese
 
used
bhomecutterdigital foilembossing/Grainingnumberingcontact uscontact usb

cutter
digital foil
digital foil
digital foil
digital
cutter
cutter
cutter
cutter
cutter
cutter
cutter
cutter
cutter
cutter
cutter
cutter
DG-32 Digital Foil press
digifoilpress
video       app

Features:

●Save cost for digital foil stamp without plate
DG32 designed for foil stamping without plates to save running cost, firstly processing jobs through laser printer or copier for where foil stamping is needed, then proceed by DG32 once, the toner on materials will be melt and stuck foil on. Fine and accuracy foil stamping is easy process by DG32.
●SRA3 paper size
Maximum paper size is SRA3 or 330mm(W)x500mm(L), covered most of digital equipments, tiny business cards also available to processing. Both foil unwind and rewind roller has equipped tension controller to keep produce high quality products on anytime. Temperature divided to nine segment

最大可以處理的紙張為33公分寬 x 50公分長,厚度可達500gsm。金箔捲的直徑為11.5公分,金箔捲取裝置的出紙和收紙端個別附有可調整張力控制設備,溫度可以隨金箔種類設定不同的溫度,以A4薄紙為例約一小時可以處理1,500張。
Auto feeder
DG32配備快速穩定的自動送紙飛達,可以節省大量人力,手送為選配。
●Muti-foils
DG32加上不同金箔材質可以做燙金、局部燙金、全面上膜、局部上膜或燙印雷射膜等工作。金箔有數種金色、數種金屬色、銀色、紅色、綠色、黃色、白色、防刮膠膜、透明平光或亮光膠膜等,互相搭配可以做出多樣效果。


Specifications:
Model
DG-32
Feeding type
Auto feeder
Pile high 50mm
Maximum speed 1,000mm~3,250mm by 9 segments
Max. paper thickness 0.07-0.25mm(70-350gsm)
Foil rolls
150M/300M(L), up to 320mm wide
Temperature units ℃ or ℉
Temperature Range
80-140℃(Standby for 70℃)
Warm up 8 minutes
Paper size 320mm(W)
Dimension
613mm x618mm x 326mm
Power supply
AC100-240V (50/60Hz) 12A


quotation
  address